Your
device is a product of superior design and craftsmanship and
should be treated with care. The suggestions below will help
you protect your warranty coverage.
Keep the device dry. Precipitation,
humidity and all types of liquids or moisture can contain
minerals that will corrode electronic circuits. If your
device does get wet, remove the battery and allow the device
to dry completely before replacing it.
Do not use or store the device in dusty,
dirty areas. Its moving parts and electronic components
can be damaged.
Do not store the device in hot areas. High
temperatures can shorten the life of electronic devices,
damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas.
When the device returns to its normal temperature, moisture
can form inside the device and damage electronic circuit
boards.
Do not attempt to open the device other
than as instructed in this guide.
Do not drop, knock, or shake the device.
Rough handling can break internal circuit boards and fine
mechanics.
Do not use harsh chemicals, cleaning solvents,
or strong detergents to clean the device.
Do not paint the device. Paint can clog
the moving parts and prevent proper operation.
Use a soft, clean, dry cloth to clean any
lenses (such as camera, proximity sensor, and light sensor
lenses).
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or attachments
could damage the device and may violate regulations governing
radio devices.
All
of the suggestions here apply equally to your device, battery
charger, or any enhancement. If any device is not working
properly, take it to the nearest authorized service facility
for service.
